The Cheap Vegetable Gardener

Growing peppers at high latitudes

15.6 years ago hydroponics, indoor growbox, peppers

Here in the Seattle area we are, as you say, latitudelly challenged. We are fortunately to have the Pacific Ocean to give us mild winters and summers though our distance from the equator provides our plants with less intense light and a relatively short growing season for summer crops. One in particular difficult summer crop are peppers.

This is important because one of the major exports of my garden are the ingredients to allow me to make homemade garden salsa (tomatoes, garlic, onions, cilantro, jalapeño peppers) Al ingredients come from my garden (except for jalapeño peppers) This year I am determined to fix this.

I have a couple strategies for doing this, the first is to “start early” pepper plants require 80-110 days from seedling to harvest, timing is everything. Given our late winters here over the past couple years, I don’t really have much of a cushion here and would also be nice if the peppers were ripe when the tomatoes are getting red as well. To get a head start many weeks ago I planted several jalapeño pepper seeds and they currently are turning into some great looking pepper plants in my grow box. As they have grown I have potted them up to encourage them to continue to grow vigorously.

Not wanting to put my eggs peppers in one basket, I have decided to try a few different techniques in case one completely fails I hopefully have a couple backups:

1. Grow pepper plant in grow box in WonderSoil
2. Grow pepper plant hydroponically using a Grodan Gro-Blocks
3. Grow pepper plant in the ground beside my tomatoes
4. Grow pepper plant in large pot in sunniest location

I honestly can not really predict the outcome of this experiment. The grow box as the advantage of accurate temperature control but the CFLs though work great can’t compare to full sun. On the other hand outdoors has the great light intensity of the actual sun though given the pepper plants can stop growing lacking 60 degree nights and at least 70 degrees during day. Given we don’t have too many nights greater than 60 degrees the grow box might have a chance.

UPDATE — 05/25/2009

Plant grown in WonderSoil in grow box at temperature controlled to remain above 60 degrees at night and a high of 80 during the day.  This is amazing results compared to the 2.5 inch plants I started with less than a month ago.

Plant grown hydroponically using a Grodan Gro-Blocks also in temperature controlled grow box.

Plant grow in actual dirt outside in good light

Plant grown in pot outside…well this one is already out after some high winds and cold mornings this one was looking pretty bad to I brought to the infirmary (the grow box) to bring it back to life, which seems to have done wonders.

The obvious winner at this point is the pepper plant in WonderSoil in the grow box, though I have noticed some recent growth in the outdoor plant now the weather has started warming up, so might be some time for Mother Nature to redeem itself.  Overall I have been very impressed with the results of the grow box but still need to see if I can get flowers and fruit…until the next update…

UPDATE — 06/20/2009

We were blessed with some warm weather so the outdoor potted plant has been doing great blossoming and almost a dozen of good sized peppers growing.

I have seen plenty of blossoms on the pepper plants in the grow box though I have not have and fruit set.  I have two theories what is causing this, first is we have hat some hot weather with the garage getting over 85 degrees even with best exhaust and airflow it was hard to keep the temperature from exceeding 90 degrees which causes the blossoms to drop.  The second reason is I have been attempting to hand pollinate the flowers with the absence of some nice bees to do the work for me.  I have been using a fine paintbrush without much luck.  Switching to having better airflow and using a Q-Tip to simulate a bees bottom.

The plant I had in the ground eventually got overtaken by a pumpkin plant which I removed and moved to the grow box given it had not shown any significant signs of growth since I transplanted it there.

Right now seems the best method is grow the pepper plant to about 18 inches and just let mother nature take care of things at that point.

Tags: cheap, cilantro, garden seeds, garlic bulbs, growbox, led, outdoor plants, pepper plants, salsa garden, tomato plants, vegetables

Cheap fogger hydroponics final results

15.6 years ago aeroponics, cheap, hydroponics, peppers, tomato

In case you missed them here is the original post on the creation of this fogger hydroponic system, and the latest update (before this one).

The plants still are still looking pretty healthy with the exception of a little phosphorus deficiency, but the blame goes on me for that one.  Been a little busy at work and have been neglecting the plants.

I decided to end this experiment since their roots were starting to get tangled and I want to use these plants for another project.

These roots are healthier than they look, some soil leached in when I put some of my pepper plants on top of the hydroponic box.

This pepper plant look really good, haven’t decided what to do with it yet.  Maybe the victim volunteer for the next hydroponic experiment.

Tags: cheap, led, outdoor plants, pepper plants, vegetables

Hardening off plants in the grow box

15.7 years ago computer, computer power control, cucumbers, electronics, indoor growbox, tomato

When you have seedlings growing indoors or a greenhouse during their life they have had the opportunity spending it in a near perfect environment with controlled temperatures, consistent lighting, no wind, etc.  If you take this happy plant and move it directly into the wild (your garden) it can, and probably will, go into shock leading to its sudden death.  The solution to this problem is to hardening off the plant.  This is a process of slowly getting the plant accustomed to the real world environment a couple hours at a time.

You start by bringing the plant outside for two hours in the late evening or early morning hours.  If the plant begins to wilt let it recover indoors until it appears healthy again.  Each day increasing the amount of time it is exposed to the outdoors over 1-2 weeks period, or until the plant can survive a full day/night outside.  At this time it is ready to get its permanent home in your garden.

This process takes a lot of patience, which as they say is a virtue.  Unfortunately I believe I am missing this virtue.  My history of hardening off plants follows a similar pattern; bring out a plant in the evening with the full intentions of bringing it back in after a few hours, unfortunately I forget and it spends its first day out in the cold all night which normally the demise of my summer plants.

This year I am using my grow box to harden off my plants.  Normally the grow box runs at about 68-72 degrees which is a great environment for my seedlings.  By allowing some hot air to vent and lowering the maximum temperature setting in the software I am able to bump the temperature down to a range of 57-65 degrees.  After a few days I will drop the temperature a few degrees until it has similar low temperature to the outdoors, while still staying at a safe temperature for the plants.

Given today using an unknown neighbor’s weather station we had a high of 48.2F and low of 35.1F I still have some time before I can safely bring my tomatoes/cucumbers outside but they should be toughened (hardening) up and ready to go when it is.

Tags: cheap, garden seeds, growbox, led, outdoor plants, tomato plants, vegetables

EasyBloom plant sensor review

15.7 years ago computer, EasyBloom, electronics, gadget, garden planning, product review

I will admit, I have a weakness for electronic gadgets, when I got wind of the EasyBloom I just had to try it out.  The EasyBloom plant sensor is a device with built-in sensors to measure light intensity, humidity, temperature, and moisture content in your soil.  It has three basic modes: Recommend, Monitor, and Water.

With the Recommend setting you place the EasyBloom into a location you want to grow something, let it sit there for at least 24 hours, plug it into your computer, and it will provide a detailed analysis of your planting area and provide a list of plants that would thrive in that location.

The Monitor setting allows you to diagnose problems with a particular plant.  You first define the type of plant you want to monitor, turn on the device and place it next to the not so healthy plant, water, return 24 hours later, and plug it again into your computer.  It will use the data stored in the sensors to give you a diagnosis to what the plant’s ailment might be..  Of course, this will not diagnose various pest or disease issue but can let you know if you have planted a little too early, in the wrong location, or are not watering enough (or too much) based on your soil structure.

Finally it has the water setting which the name should imply, will notify you when you need to water your plants.

To test this thing out I had three locations in mind to take measurements, each of which would provide a huge diversity of readings.

First, I put the EasyBloom in my grow box in the Recommend mode.  I have complete control over the temperature and lighting I definitely could confirm the devices accuracy and I expected to see decent diversity of plants recommended.  After placing the device in my grow box for almost 24 hours (see missing results below)

Overall the readings were nearly exactly what I expected though I was hoping to get a full sun rating, guess I may need to add an extra bulb to the box.  Even with my conditions it did recommend 176 plants that I could grow inside it to maturity, though I am going to demand a rematch after adding a little more light

• 

  Second, I brought the sensor and set it up next to my office window.  Currently I am growing Lemon Verbena I transplanted from my garden.  I wasn’t concerned about moisture content so for this reading I didn’t include the moisture sensor and here were the results that were returned.

• 

  After this result I felt a little better about my grow box since it at least it was beating of an eastern facing window sill.  With this result the program recommended 92 shade loving plants with Lemon Verbena not being one of them, though I have been providing some supplemental light to the plants.

  Finally, I used the EasyBloom on my southern facing fence line plot (where I normally grow my cucumbers and tomatoes)  This is where I wondered of the usefulness of EasyBloom to actually give good information about planning a garden in the offseason.  Though I can not grow tomatoes outside right now due to cold, would it still let me know that it was still possible.  Well here are the readings:

  

  When I put the sensor outside it was raining pretty hard so passed the “weather proof” test.  Though it did clear up the next day which is reflected in the “Full Sun” light reading.  This was the obvious winner with 3458 plants recommended with the over 5000 in their database.

  In conclusion, I will be the first to admit that the EasyBloom would not be on the necessity list for gardening tools, but for a beginning gardener it could provide some valuable incites to help your first few years be much more successful.  For nerds/geeks like me it is a pretty cool toy, that I will be sure to be using in testing new lighting and grow box designs in the future.

Tags: cheap, growbox, led, outdoor plants, tomato plants, vegetables

Make your own supplemental LED grow light

15.7 years ago cheap, indoor growbox, LEDs

I never got a round to making a hydroponic system out of my Cafe Steamer, but I did use part of it to create a supplemental red LED light.  The construction of this was very easy and you can do the same thing with an old string of LED Christmas lights and some soft plastic (margarine or frozen dinner container) from your recycling bin.

Take the plastic and drill evenly spaced holes through the plastic.  Make sure to do a few test holes with a few different bits to determine which will allow a snug fit but not causing you to force/break the bulbs.  Once all the holes are drilled, carefully slide in all the bulbs, plug it in, and your project is done.

I am adding this one to my computerized grow box as a little supplemental light for my peppers plants, which I am planning on growing completely indoors this year.

Tags: cheap, garden seeds, grow lights, growbox, led, outdoor plants, pepper plants, vegetables

Finish outdoor seed planting with coffee grounds

15.7 years ago garlic bulbs, onions, outdoor seed starting

It has been a blessing that the competition for free coffee grounds at the Starbucks at my work has increased now the weather warmed up and I have freed from the temptation to grab yet another free shiny silver bag of grounds.  The reason is, I have put four bags in my compost, worked generous amounts into my vegetable garden and I still have six bags left.  Now I am looking at inventive ways to use the rest up.  I tried mixing with perlite to make a cheap potting soil (failed still no room for roots) but I believe I have come across one success I thought I would share.

When you are finished planting seeds outdoors apply a thin layer of coffee grounds.  This will deter slugs from going after your new seedlings and keep cats from mistaking your nicely loosened and raked soil for their kitty litter. 

I have done this for my larger seed plants (peas, garlic, onions, cilantro) but for the small seed plants (carrots, lettuce, spinach) I used the coffee grounds as a seed covering.

So far the results are great.  All of my peas/garlic/onions/spinach have sprouted with no signs of pests (four-legged nor zero-legged).

Tags: cheap, cilantro, coffee grounds, compost, garden seeds, garlic bulbs, led, outdoor plants, vegetables