Search Results

Trimming the raspberry bushes

WP_000224

This weekend I decided to clean up the yard a bit and do some of my later in the season chores a little early.  One of these on the list was trimming my new (second year) raspberry bushes.  The first step was getting these bushes under control, if I had a larger space I probably would build a more stable construction for better airflow and make picking easier…but given my small space I simply took a couple nails and a couple of lengths of twine and loosely supported the stems to keep them from falling over into our lawn.  Finish by tying the twine around the nails and task number one is done.

 

The production of raspberries goes in a two year cycle.  The first year you get vegetative stalks (all green no flowers or berries) and the second year these previous vegetative stalks become flowering stalks and produce nice delicious berries.  During this time more vegetative stalks develop and the process repeats itself.  Once a flowering stalk completes delivering all of its berries it will turn brown and die off.  Taking care of these was my first task.  All this requires is finding the flowing stalks and cut them at their base, easy way to go is to cut anything brown and then pull them out (using gloves is advised)

This part was pretty easy since I only have a few flowering stalks the first year but you can see from the picture above I should get a decent crop of raspberries now the plant is becoming more established.

WP_000228

Now I simply let the plants do their thing and when the leaves fall off I will trim them to a height of about 5 feet, next spring given them a healthy scoop of alfalfa pellets and wait for the bounty of sweetness to come in next summer.

10 Tips for growing tomatoes in the Northwest

2682

Unfortunately we do not have no where near the preferred climate to grow tomatoes.  We have extremely mild temperatures with summer maximum average high of 78°F and maximum average lows of 59°F.  Take that with our very short window of consistent rain (bringing blight) tomato plants are lucky to even be surviving when planted in our area let alone have a tremendous yield, though with a little planning and care you can be eating delicious tomatoes from your garden.

1. Pick the right variety.  You want to choose a plant that has has a low number of days to maturity.  Given we have a very short growing season this can significantly improve your chances of growing some ripe red tomatoes.  Some good examples of tomato varieties to try followed by the average days to maturity Early Girl (52), Goliath (60), Juliet (60), Oregon Spring (58), Sugary (62), or Sunsugar (62).  You may also want to consider growing smaller tomato varieties such as cherry or globe which can be beneficial given the smaller the fruit the shorter amount of time is takes to ripen which could allow you to harvest your tomatoes before the rains along with the diseases.

2. Start with big plants.  Paying a couple dollars more on your tomato plants can shave off a 2-3 weeks off your “days to maturity” number so go for the largest plant you can afford.  On a budget (or just cheap like myself) plant your seeds early and make use of a greenhouse or grow box to make your own more mature tomato plants and save yourself a considerable amount of money.  If you do purchase a larger plant, don’t be in a hurry to get it into the ground…let they nursery keep it alive for you until you have optimum environment to plant it in your garden.

3. Plant at the right time.  Even more important that the air temperature is the temperature of the soil you can actually plant tomatoes with a soil temperature of 50°F but the closer you can get to 60°F the better your plants will respond.  When it comes to measuring your soil temperature you can use a standard inexpensive soil thermometer but personally I just use my handy digital grill thermometer and if you are concerned about using the same probe in your meat than your dirt you can always pickup a extra temperature probe.

005

4. Work in the trenches.  The temperature of the soil can vary by 5-10°F as you dig deeper into the soil.  By planting your tomato plants in a trench no only do you get the benefits of a larger root but also a root system much closer to the surface of the soil which can provide several additional degrees to your advantage.  One disadvantage to this method is you do need to be diligent with your watering due since the ground will obviously dry out on the area closest to the surface.

004

The process for planting trenched tomato plants is very simple. Dig a shallow trench about an inch lower than the root ball. Lay the plant on its side removing an stems that are about to be buried. Cover with soil and pack down lightly and use some sticks to help support the plants until they get adapted to their new orientation.  Unless it is pouring down rain when you plant them like I did be sure to water your plants well after planting.

008
Note: I intentionally took the photo of these plants a few hours after planting to show the expected shock they should encounter…this is normal don’t be alarmed they will perk up in a day or two.

5. Keep your plants warm.  As mentioned before the temperatures are almost ever warm enough but fortunately there are a few products to help out a little for this:

These Red Tomato Teepees are simply filled with water and absorb heat during the day and then slowly release it during the night and is advertised to help bring you yields up to 6 week earlier than without them.  This provides more adequate temperatures for your plants and also some insurance for cold spring mornings.  These are fairly inexpensive and can easily be collapsed and stored away when not needed.
If you have a small number of plants to provide a little shelter you may want to consider a cold frame.  These provide a few extra degrees of protecting during the cold nights but also protect the plants from high winds and hard rains.  You can also use this as a little hot box for your peppers once your tomatoes are more established.
image If you really want to go all out you can also consider soil warming cable this is simply a cable you bury into the ground and plug it in and will provide heat underground where the roots need it most.  Now I will be the first to admit this may be more of an extreme measure for your tomato plants but if you are considering growing crops all year round this could be a good investment.


6. Grow your tomatoes in upside down planters. 
One of the advantages of growing tomatoes upside down is the planter is exposed to the heat from the sun thus increasing the soils temperature providing better temperatures for the roots of your tomato plants to grow.  Now whether you opt to make your own upside down planter or use one of the commercial versions such as the TopsyTurvy, this can be a great way to sneak your plants out at least a couple of weeks earlier.

image

7. Don’t let your tomato plants get wet.  Living in the Northwest, rain happens and there is not much we can do about it.  This moisture can spread disease and promote fungal growth so the less moisture you can get on your plants leaves the better.  There are a few things you can do to reduce the amount of moisture on your plants.  First, when watering your plants avoid getting water on the leaves.  Simply water the soil right at the surface, this can be easily done with a soaker hose, long wand spray nozzle, or even a simple watering can.  If you are experiencing some hard rains at the end of your season you may be able to delay blight by installing a slight overhang over your tomato plants.  By taking some rigid clear plastic and installing over your plants you can reduce the amount of rain that falls directly on your plants while not inhibiting light getting to your plants.

8. Fertilize.  Providing the right nutrients to the plants as they need them can help encourage their growth and provide vigorous plants in the shorter period of time.  The problem with tomatoes is if you over fertilize your plants will simply grow larger and fail to produce fruit as can be seen from this tomato plant I had growing out of my compost bin.

image

I provide a weak balanced fertilizer such as alfalfa pellet applied every couple weeks to the top of the soil allowing them to break down and provide nutrients on each watering.

image

Once the plant begins to set flowers I switch to applying about a 1/4 cup of bone meal to each of the plants about every 3 weeks to allow the plants to get the phosphorous they need during for reproductive function at this this time.

9. Many plants with less tomatoes.  The less tomatoes your plants has ripening on its vines the more energy it has to get them to that nice delicious red color for picking.  By pinching off all the suckers not on the main vine you will get your tomatoes to ripen more quickly while taking less space.  By doing this I can plant my tomatoes 18-24” apart allowing me to get a few extra plants in to make up for some of this lost yield ending up with less green tomatoes at the end of the season.

10. Get supermarket quality tomatoes from your garden. Of course tomatoes ripened on the vine will have the better taste but when your season runs out and your tomatoes are still green what can you do?  One option is to take any flawless tomatoes (no bruises, no cracks) place them very gently in a cardboard box padded on bottom with newspaper and place in a cool humid location. You may also add a ripe banana to speed up the process by adding a little extra ethylene.  If you are luck in a couple/few weeks you should have some red tomatoes.

Growing peppers during a cold Pacific Northwest summer

017

Nearly August and I decided it is finally time to bring the peppers out from the garage, though in some ways they are doing so well in the heated grow box with a killer 120 watt Extreme Flower LED lighting not sure if I should chance it but looking at the upcoming forecast this might be as good as it gets.

image

So far my peppers in the Topsy Turvy strawberry planter appears to be a success.  Even with the cold wet summer we have been having plants have survived and even has at least one baby cayenne pepper growing on it.

014

Though they are just now starting to see their first rays of sunshine have a good looking Rossi Italian Pepper growing here.

002

Here I have a couple of banana peppers I can pick anytime.

005

I am also excited to see these jalapeno peppers provided I ran out of jalapeno pepper powder a few months ago and have been missing it in my omelets in the mornings.

009

Finally I have my cayenne plants which was a survivor from last year, I pulled it into the garage to let some of the last few peppers ripen up as the temperatures got cool and forgot about it.  After a few months I assumed it was dead until I saw some new growth on the plant and quickly put it under the LEDs where it fully recovered and started flowering and producing fruit.  Currently drying some of the pods and also saving some of the extra mature ones to save for seeds might have a hearty specimen here.

012

Fiskars 6201 Momentum Push Reel Lawn Mower review

image

Last weekend my old gas mower finally gave its last breathe of exhaust and so it was time to get a new mower.  Provided I have a relatively small yard and a very cramped garage I decided to give a manual push lawn mower or more well known as reel lawn mower.  After some research on the reel mowers on the market I finally ended up buying the Fiskars 6201 Momentum Push Reel Lawn Mower.

Though at a retail price of $199.99 you could easily get a gas powered lawn mower for the same price, but you also have to consider the maintenance cost on a gas mower which I estimate I normally paid out $25-30 a year between oil, air filters, spark plugs, and gas (with fuel additives).  As a side  bonus a push mower also produces no emissions so it is a much more environmentally friendly option.

image

What finally sold me on the mower were the two features that seemed to be lacking from the cheaper reel mowers.  First was the ability to adjust cutting height from 1” to 4” this is important for a couple of reasons.  First you should only cut 1/3 of your grasses length or this can stress your grass causing damage to the roots.  If you grass is 4 inches tall and you mower has a static height of 2 inches this is not possible.  Second I like to keep my grass cut at around 3 inches to help shade out the weeds that may be trying to poke up from below so with the other models this was also not a viable option for me.

The next thing that I liked about this mower is its construction, I am a pretty strong guy and looking at the design of some of the other models I could easily see myself barreling through some thick grass and have to end up bringing the mower back to the store in a couple of pieces.  With this bad boy weighing in at just over 50 lbs it has some solid steel construction which should easily be able to withstand my man handling.

Upon opening the box the mower took about 5-10 minutes to assemble which was basically attaching four bolts to put the handle together and attach it to the main part of the mower.  After adjusting the height to 3 inches I headed out to try the mower out.  My lawn was about 4 inches tall and I was able to easily mow through my yard with minimal effort.  Though the clippings were not as small as my gas mulching mower would create they still created a small enough mess that I didn’t think raking was necessary.  To put the mower through its paces I moved the level down to 2.5 inches, this time it was a bit more of a workout to get through the grass and they size of the clippings were a bit larger (as expected) compared to when I was mowing at 3 inches but still at a reasonable mess to avoid raking.  I also was impressed on how the mower easily cut through the few dandelions that I hadn’t pulled by hand yet without any problems.

Overall I was impressed with the Fiskars 6201 Momentum Push Reel Lawn Mower and did not experience any buyers remorse after my first use on the lawn.  Overall the effort to push this around was not much different than a typical push gas mower when mowing 1” of grass, though can provide but of a workout when it exceeds that amount, but it is solid and has no problems barreling through the grass and weeds.

Disclosure: This review was conducted with no association or compensation from Fiskars or representatives.

The winner of the Annabees giveaway is

014

The winner of the bottle of Annabees bee attractant is Mary C.  That is the last of our current wave of contests but I am always out looking for new ones.

Start cheap herb garden this thanksgiving using cuttings

WP_20161121_11_40_18_Pro_LI

Each thanksgiving I always end up buying rosemary and sage for our turkey dinner always having thoughts that I should plant some next spring…winter happens then of course I forget until next thanksgiving…

This year I got a bit more proactive and decided to just start the plants now using cuttings from fresh herbs I purchased from the grocery store.  I have done this before with mint and actually have done again if you look carefully in the same picture above since I remembered bringing some mint with me when I moved…though no where to be seen…maybe it is possible to kill mint who knew…

So process to clone take a cutting from an herb usually goes something like this:

WP_20161121_11_34_28_Pro_LI

Step #1: Get some herbs from your grocery store…or if you notice a nice neighbor with some growing in their yard you can ask nicely if you can take a cutting

WP_20161121_11_35_12_Pro_LI

Step #2: Cut the stem just under the node (place where new leaves are coming out…I typically cut at around a 45 degree angle with theory there is more surface area for root growth but probably doesn’t matter all that much.

WP_20161121_11_36_26_Pro_LI

Step #3: Remove all leaves except last couple and those cut about half of them off.  This ensures that energy is going towards root growth and should help with moisture loss.

WP_20161121_11_37_01_Pro_LI

Step #4: Couple ways you can go at this point…you can just drop them in water and check on them every few days and make sure they still have water…or you can plant them directly in soil and possible water a couple times a day to keep soil from drying out…prone to being easily distracted I pretty much 100% go with option 1 but if you were creating dozens of these then soil may be a better option.

Step #5: (Optional) To preserves moisture you can place a plastic bag over the glass or even better get one of those shower caps you took from the motel and really had no good use for and place that on top.  I normally skip this step since I live in Western Washington high humidity has some advantages…

Step #6: Wait a 2-3 weeks until the plant develops some pretty solid roots then transplant into some soil and be sure to keep well watered until it gets established.

Hopefully if I did all this correctly I will not be buying Sage and Rosemary next year…oh and for Rosemary you might be able to tell, I cheated and just paid the extra dollar and got a live plant with its own roots already…though probably will still take a couple cuttings for “fun” and backup just in case…and not a bad edible ornamental plant for the yard if I end up with a couple extra…

IKE